Specifications
MACHINE CONFIGURATION
(Options and accessories included with this machine)
- Edge scraping unit
- Brushing unit
- Glue scraping unit
- Internal machine lightening
- Tools kit radius 3 mm (instead of standard radius 2 mm)
| TECHNICAL FEATURES | |||
| Workable dimensions | [mm] | 3000 x 525 (118.12” x 20.69”) | |
| Workable height | [mm] | 904 (35.56”) | |
| Thickness of rolled edges | [mm] | 0.4 ÷ 3 (up to 0.12”) | |
| Min. ÷ max. panel height | [mm] | 8 ÷ 50 (0.31 ÷ 1.94”) | |
| Min. panel length/width with rolled edges | [mm] | 120/110 (4.75” / 4.31”) | |
| Feed speed | [m/min] | 7 (23 f/min) | |
| Feed motor power | [kW] | 0.55 | |
| Pneumatic operating pressure | [bar] | 6.5 | |
| Exhaust outlet diameter (glue pot) | [mm] | 60 (2.37”) | |
| No. 2 exhaust outlets diameter (trimming unit) | [mm] | 60 (2.37”) | |
| No. 2 exhaust outlets diameter (pre-milling unit) | [mm] | 80 (3.12”) | |
No 1 exhaust hood (end cutting unit-rounding unit) diameter | [mm] | 60 (2.37”) | |
| Operating temperature | [°C] | 20 ÷ 190 (68 ÷ 374 °F) | |
| PRE-MILLING UNIT | |||
| Motor power | [kW] | 3 | |
| Tools rotation speed | [rpm] | 7.200 | |
| No. 2 diamond tools | Ø 80 mm H=56 Z2 (3.12”) | ||
| Stock removal | [mm] | 0,5/1/1,5/2 (up to 0.06”) | |
| GLUE POT UNIT | |||
| Motor power | [kW] | 0.25 | |
| Glue capacity | [kg] | ~ 0.8 (1.8 lbs) | |
| COMBINED END CUTTING-ROUNDING UNIT | |||
| Motor power | [kW] | 0.35 | |
| Tool | Ø 58 mm Z4 (4.94”) | ||
| Tool rotation speed | [rpm] | 12.000 | |
| TRIMMING UNIT | |||
| Upper/lower motor power | [kW] | 2 x 0.35 | |
| Widia cutters | Ø 55.3 mm Z3 (2.19”) | ||
| Cutters rotation speed | [rpm] | 12.000 | |
| Other technical features: | |||
| USA Voltage-Frequency | 230V-60Hz |
Design features
High productivity by the track feed speed. The encoder for feeding panel control ensures the total working cycle control
Technologically advanced solutions such as the end-cutting/rounding combined unit that carries out the end-cutting and the rounding of thin and thick edges up to 3 mm, for the best panel finish quality.
A new innovative system of self-lubrication of the glue pot, enables a more extensive use of the edge banding machine without the necessity of lubrication. Two rollers press the edge banding evenly and efficiently on to the panel edge for an ideal edge application
Panel edge surface without any imperfections before the gluing operation thanks to the pre-milling unit. It utilizes 2 diamond tools with opposing rotation and timed intervention that, through the removal operation, corrects any panel imperfections caused by the saw cutting process and panel storage.
The simple and intuitive PLC control system allows an easy selection of all the main functions and guides the operator during maintenance, cleaning and diagnostic operations.