2016 Giben KG -365 Edgebander
Premill – Premelt - Gluing - End trim - Top and bottom trim - Scrape - Buffing
The KG 365 is ideal for the application of veneer and coiled PVC from 0.4 up to 3 mm of thickness and strips up to 5 mm of thickness.
Standard Configuration:
- Speed 12-20 m/min. (may vary depending on additional groups)
- Chain drag with manual lubrication of the sliding guides
- Support bar at 700 mm. extractable
- Maximum panel height 60 mm.
- Maximum edge thickness 3 mm.
- Minimum length 120 mm.
- Minimum width 80 mm.
- Voltage
Guide for Effective Length 400mm
- In tempered iron steel
- Safety device for remote input panels by mechanical locking
- PLC FOR THE ADJUSTMENT OF GROUPS
- Control of each unit on/off speed
- For banding ABS and PVC edges or similar materials
Plate for Edge Roll
- Autoloader with curled roller.
- Introduction of PVC and ABS edges.
- Shearing machine for cutting roll edges max 3 mm. thick.
Glue Group
- Automatic loading of edgebanding material in rolls and applying glue onto the panel. Glue pot for melting with fast heating; application roller with device to adjust the glue quantity that is applied on the panel; dual digital electronic control of the temperature in the tank and on the roller.
- 2 resistors: one on roller 250 W and the second in a glue tank 1500 W.
- Temperature sensor roller.
Pre-Melting Glue System
- Quick change glue pot (top pot capacity 5KG lower pot capacity 2KG.
Profile Scraper:
- Removal of material to clean the profile shape from possible imperfections from the trimmer tooling.
- Tools included.
- Structure in cast iron solid base and vertical development.
- Manual tool adjustment.
Cutting Head:
- Solid cast iron structure with vertical development and moving with motors on precision linear guides.
- 2 motors (0.35 kW) 12 000 min-1 200 Hz.
- Two position pneumatic adjustment (straight and angle).
- Blades (included):
- Diameter 104 mm.
- Internal diameter 32 mm.
- Thickness 2 mm.
Top & Bottom Fine Trimming Group:
- 2 motors (0.7 kW) 18 000 min-1 300Hz
- each motor is equipped with manual groups adjustment.
- Tools with heads and cutters diameter 69 mm.
- Z6 with profiles on request.
- 3 mm tooling standard
Profile Scraper:
- Removal of material to clean profile shape from possible imperfections from trimmer tooling.
- Tools included.
- Structure in cast iron solid base and vertical development.
- Manual tool adjustment.
Buffing Unit:
- Two buffing wheels of resistant cloth for cleaning panels and boards.
- 2 motors (0.30 kW) 200 Hz 1 200 min.-1
Priced at $ 24,950.00 - FOB Orlando Florida
Your business and relationship are very important to me as your representative at Spence Machinery and to our entire company.
If you wish to proceed with this order, please indicate so by signing in the space provided below and returning a copy of this offer as soon as possible. Prices can only be held for 30 days from the date of this offer unless otherwise stated used machines are subject to prior sale. Payment terms for machinery are 60% with order, 30% prior to shipment, and the balance will be due upon delivery. Sales tax in Florida will be due unless a Special Exemption Form is completed with the order.
Thank you for the opportunity to assist you with the production machinery requirements for your company. We look forward to doing business with you. Please don’t hesitate to contact me if you have any questions.
Sincerely,
______________________________
Ordered By
Sam Spence ______________________________
407-509-8150 Title and Date
SUGGESTED EXEMPTION CERTIFICATE
FOR PURCHASES OF INDUSTRIAL MACHINERY AND EQUIPMENT, PARTS,
AND ACCESSORIES
[Note: This certificate may be a separate document attached to a purchase order, or may be incorporated within a purchase order itself.]
I certify that the industrial machinery and equipment, parts, or accessories purchased on or after 03/29/2023 (Date) from __Spence Machinery Company, LLC_______________ (Vendor's Name) are exempt from sales tax under paragraph 212.08(7)(kkk), F.S.
The machinery and equipment will be used by an eligible manufacturing business at a fixed location in Florida at __________________________________________ (Street Address and City), Florida, to
manufacture, process, compound, or produce items of tangible personal property for sale. The parts and accessories purchased for the machinery and equipment will be used at such location and are purchased
prior to the date the machinery and equipment are placed into service.
I certify that ______________________________________________ (Name of Purchasing Business) is a
business establishment contained within an industry classified under NAICS codes 31, 32, or 33, as contained
in the North American Industry Classification System, as published in 2007 by the Office of Management and
Budget, Executive Office of the President.
I understand that if I use the machinery, equipment, parts, or accessories for any nonexempt purpose, I must pay tax on the purchase price directly to the Florida Department of Revenue.
I understand that if I fraudulently issue this Certificate to evade payment of the sales tax, I will be liable for
payment of the sales tax, plus a penalty of 200% of the tax, and may be subject to conviction of a third degree
felony.
_________________________________________ _________________________________
Purchaser's Name (Print or Type) Title
_________________________________________
Purchaser's Signature
_________________________________________ __________________________________ Florida Sales Tax Number Federal Employer Identification
_________________________________________ __________________________________ Date Telephone Number
This certificate relieves the vendor from the responsibility of collecting tax on exempt sales amounts.
The Department will look solely to the purchaser for recovery of tax if the purchaser was not entitled to the exemption.
Form to be retained in vendor's records.